System device operation method of carrier tape forming machine

The foam carrier molding machine is equipped with an automatic feeding system, equipped with a high-pressure silo and an automatic feeding device. 15 automatic guns can be loaded at the same time. The guiding rod of the machine is made of 45 alloy steel, hardened by heat treatment and hardened by a thread grinder. Smooth surface and long service life.

The foam carrier molding machine system adopts multiple heating methods, adopts solid and shifting mode balancing valve system, and controls the instrument and control valve parts to complete the cycle, thereby making the machine more steam efficient. The problem of unstable product quality due to unstable steam source is solved, and the quality is greatly improved. The EPS foam mechanical cutting machine is light and strong, and has amazing cutting precision and repeatability. When cutting, the micro-fan is used to cool the heating wire, and a special spring is used to compensate the elongation of the heating wire after being heated.

High-performance heating wire, this high-life alloy wire is composed of nickel, chrome, cobalt, molybdenum and titanium. It is extensible in length and can accelerate the cutting speed and has a long life. The booting speed is not very fast, and the amount of glue is relatively small, which causes the raw material to be plasticized too much. The particle material slips in the barrel, causing the screw speed to fluctuate, causing the extrusion pressure to fluctuate, resulting in temperature control misalignment. Before starting the machine, all preparations should be done to minimize the waiting time during the warm-up process, and the template should be replaced quickly and neatly. If the screw of the equipment used is cooled by oil cooling, it is related to the setting of the instrument in the mold thermostat, the smoothness of the pipeline, and the oil quality.